13TW5v2-2 | Altavoz de subgraves Élite de 13,5 pulgadas
Shallow-Mount 1200W 13.5" 2-ohm Subwoofer
Enjoy a complimentary $75 Installation credit on all Online Orders. Limit one per customer. Terms and Conditions apply.
Need Help?
Controlador de subwoofer de 13,5 pulgadas (345 mm), 2 Ω
13TW5v2-2
Altavoz de subgraves TW5v2 de 13,5 pulgadas (600 W, 2 Ω)
No podíamos dejar solo el woofer delgado definitivo... teníamos que hacerlo aún mejor.
Nuestra tecnología patentada de woofer de línea delgada comprime la arquitectura del 13TW5v2 utilizando una estructura de "tubo concéntrico" que soporta la bobina móvil de 7 pulgadas de diámetro y los accesorios de suspensión. Esto permite colocar la estructura del motor grande mucho más adelante en el altavoz que con los diseños convencionales, al tiempo que permite una excelente capacidad de excursión lineal y estabilidad mecánica.
Para aprovechar aún más el rendimiento de esta tecnología, el v2 mejora el 13TW5 original con un 13% más de capacidad de excursión lineal. El chasis de aleación fundida también se ha modificado para mayor resistencia y el motor rediseñado ahora presenta una ventilación anular. El v2 también está disponible en versiones de bobina móvil simple de 2 ohmios y de 4 ohmios para adaptarse a una amplia gama de aplicaciones.
De acuerdo con su misión de “espacios reducidos”, el 13TW5v2 está optimizado para gabinetes que son mucho más pequeños de lo que requieren la mayoría de los woofers de 12 pulgadas y solo un poco más grandes que las necesidades de espacio aéreo de un woofer típico de caja pequeña de 10 pulgadas. El sistema de montaje está diseñado para ocupar aproximadamente el mismo espacio que un woofer típico de 12 pulgadas.
El 13TW5v2 se utiliza mejor con una potencia de amplificador en el rango de 250 W - 600 W y está optimizado para funcionar en 0,80 pies cúbicos. Gabinete sellado de 22,7 l (pies).
Nunca antes habían sido posibles unos subgraves de tan alta calidad en las aplicaciones de instalación más exigentes.
Especificaciones generales
Especificaciones de generación 
|
|
|---|---|
| Manejo continuo de energía (RMS) | 600 vatios |
| Potencia recomendada del amplificador (RMS) | 250 - 600W |
| Impedancia nominal (Znom) | 2 Ω |
Especificaciones físicas 
|
|
| Diámetro nominal | 13,5 pulgadas/345 mm |
| Diámetro total (A) | A1: 14,2 pulgadas/361 mm A2: 13,0 pulgadas/330 mm |
| Diámetro del orificio de montaje (B) | 12,5 pulgadas/318 mm |
| Diámetro del círculo del orificio del perno (C) | 13,5 pulgadas/343 mm |
| Diámetro exterior del motor (D) | 6,75 pulgadas/171 mm |
| Profundidad de montaje (E) | 2,625 pulgadas/67 mm |
| Desplazamiento del conductor | 0,052 pies cúbicos/1,47 L |
| Peso neto | 20,5 libras/9,3 kg |
| Parámetros | |
| Resonancia de aire libre (Fs) | 25,95Hz |
| “Q” Eléctrica (Qes) | 0,51 |
| “Q” mecánica (Qms) | 10.648 |
| Total de altavoces “Q” (Qts) | 0,479 |
| Cumplimiento equivalente (Vas) | 2,26 pies cúbicos / 64,00 litros |
| Excursión lineal unidireccional (Xmax)* | 0,433 pulgadas/11 mm |
| Eficiencia de referencia (no) | 0,23% |
| Eficiencia (1 W / 1 m)** | 85,51 dB SPL |
| Área efectiva del pistón (Sd) | 98,26 pulgadas cuadradas / 0,0634 m2 |
| Resistencia CC (Re) | 2.100 Ω |
| * Las especificaciones Xmax se obtienen mediante el método de voladizo de bobina móvil unidireccional sin aplicar factores de corrección. ** La eficiencia (1 W / 1 m) no es un indicador preciso de la capacidad de salida de un subwoofer y no debe usarse como comparación con otros subwoofers para determinar cuál es "más ruidoso". |
|
Especificaciones del gabinete sellado 
|
|
| Espesor de pared | 0,75 pulgadas/19 mm |
| Grosor del deflector frontal | 0,75 pulgadas/19 mm |
| Volumen (int. neto) | 0,80 pies cúbicos / 22,66 L |
| Ancho externo (W) | 19 pulgadas/483 mm |
| Altura externa (H) | 15 pulgadas/381 mm |
| Profundidad externa (D) | 7,75 pulgadas/197 mm |
| F3 | 41,18Hz |
| fc | 50,75Hz |
| qtc | 0.937 |
| Especificaciones del gabinete portado | |
| * No se recomienda una caja con puerto para este subwoofer | |
JL Audio 13TW5V2-2 Series TW5v2-2 Series 13.5" 1200W Peak Power Handling Shallow Mount Component Car Subwoofer
JL Audio’s patented thin-line woofer technology compresses the entire structure of the 13TW5v2 using a unique concentric tube design that supports the oversized 7-inch voice coil and suspension components. This innovation positions the motor structure much farther forward than traditional subwoofers, enabling excellent linear excursion, mechanical stability, and ultra-shallow mounting depth. The v2 version takes performance even further, offering 13% greater linear excursion than the original 13TW5.
Mineral-filled Polypropylene Cone for Strength and Accuracy
Built for strength and precision, the 13TW5v2 features a mineral-filled polypropylene cone, a reinforced cast alloy chassis, and a redesigned motor equipped with an annular vent for improved thermal management. Available in single 2-ohm and 4-ohm configurations, it offers wiring flexibility for a wide range of systems.
Designed for tight installations, this subwoofer is optimized for extremely small enclosures, requiring even less air space than most 12" woofers and only slightly more than many compact 10" subs. Its mounting footprint closely matches that of a typical 12-inch woofer, making it ideal for challenging, space-limited applications.
Best Used with Amplifier Power
For optimal performance, the 13TW5v2 should be paired with 250W–600W of amplifier power and installed in a 0.80 cu. ft. (22.7 L) sealed enclosure. It delivers exceptionally clean, high-quality sub-bass performance where traditional subwoofers simply can’t fit, making it a top choice for tight-space installations without sacrificing sound quality.
Key Features
– Patented thin-line design using a concentric tube structure
– 7" voice coil for enhanced power handling and stability
– 13% greater linear excursion compared to the original 13TW5
– Mineral-filled polypropylene cone for strength and accuracy
– Reinforced cast alloy chassis with redesigned annular vent
– Available in single 2-ohm or 4-ohm versions
– Optimized for ultra-compact enclosures (0.80 cu. ft. sealed)
– Ideal for 250W–600W amplifier power
– Fits in the same footprint as many typical 12" woofers
What's Inside?
- 2 Voice coil jumper wires (installed)
- 3.5" Thin-Line subwoofer<
- Owner's manual
- User Manual
What Others Are Saying
Eddie was great - SDCS installed a new head unit in my 2019 4Runner. He was honest in his opinions regarding the options I was considering. Pricing was also good - he was able to reuse some of my existing installation kit so I saved a bit of $$.Installation was clean and fast and he took the time to walk through the features before I left. Highly recommend!!
I had a great time at this shop! The staff really knows their stuff and took the time to explain the different options without pressure. Installation was quick, clean and professional. Everything looks factory and sounds amazing. The prices were fair and customer service was above and beyond. I highly recommend this place if you're looking for quality car audio and excellent service.
Those guys are really professional! I had a new Alpine floating head unit installed in my 2008 Mercedes, and it feels like a brand-new car. The installation was super clean. At first, the sound wasn’t the same as the factory stereo, but Kevin tuned it to be just as good—if not better—without adding any new amps. They even used my factory GPS antenna so I don’t have extra wires hanging out. On top of that, they matched the online price. Big thanks to Kevin and Eddie—highly recommended!
Kevin was awesome, he took his time and explained everything to me. I went in initially for a dash cam install and then decided to get a sub and amp installed as well. Both turned out great and will be returning if I need more work done.
Came In not knowing what to expect when suddenly my stereo stopped working. Spoke with Kevin in the front and after a VERY fast diagnosing they discovered my wiring was incorrect. After only about 45 minutes total being in the store I was on my way to the beach with a working stereo again! Thank you so much SDCARSTEREO
Highly recommend Kevin and the team at San Diego Car Stereo for any issues with aftermarket stereos. I bought a car with an aftermarket stereo and AC unit that wasn’t working properly—specifically, the heat wasn’t functioning due to an improper setup. I had several people look at it with no luck, and even the dealership basically refused to help because it was an aftermarket install. I came to Kevin and his team over the holidays feeling pretty defeated, but he was confident he could get the heat working before I headed back to a Colorado winter. Sure enough, he got it done.
FAQ
Do products purchased from San Diego Car Stereo come with a warranty?
Yes, all products come with a 1-year manufacturer warranty unless otherwise stated. This covers any defects excluding physical damage.
Are these products brand new?
Yes, every product we sell is 100% brand new, unused, and comes in original manufacturer packaging unless clearly marked otherwise.
Do you offer installation services?
Yes, we offer professional installation services at both of our San Diego Car Stereo locations. Our expert technicians have over 50 years of combined experience to install all of your car, marine, or offroad audio needs. Stop by or give us a call to schedule an appointment to get a quote in person.