Ride Louder with Kenwood XM50F 5.25” Coaxial Motorcycle Speakers

Introduction

The Kenwood XM50F 5.25” coaxial motorcycle speakers are engineered specifically to deliver crisp, high-output sound on the open road. Built to replace the stock speakers in select Harley-Davidson Touring motorcycles from 1998 to 2013, these high-performance speakers are made to cut through wind, engine, and road noise — providing crystal-clear audio at any speed. With a rugged build, high power handling, and direct-fit design, the XM50F speakers bring your ride’s soundtrack to life with stunning clarity and volume.

Loud and Clear Sound at Any Speed

The Kenwood XM50F is tuned to perform in high-noise environments. Each speaker features a 2-ohm impedance and 150 watts RMS power handling, making it ideal for use with factory or aftermarket amplifiers. The Injection-Molded Polypropylene (IMPP) woofer cones provide powerful midbass, while the 1-inch PEI dome tweeters deliver detailed highs that stay clean and non-fatiguing — even at highway speeds. Whether you’re rocking classic tunes or bass-heavy hits, the XM50F ensures that your music is always front and center.

Tailored Fit for Harley-Davidson Touring Models

Designed as a direct-fit upgrade, the Kenwood XM50F fits seamlessly into the factory fairing speaker locations on a wide range of Harley-Davidson Touring bikes. There's no need for modifications or custom brackets — these speakers drop right into place using the existing hardware and wiring. For 1998–2013 Touring models, it’s a hassle-free upgrade that transforms your audio experience.

Compatible Harley-Davidson Models (1998–2013)

The Kenwood XM50F speakers are specifically designed to fit the following Harley-Davidson motorcycles:

1998–2005 (with aftermarket amp installed):

• FLHT Electra Glide Standard

• FLHTC Electra Glide Classic

• FLHTCU Ultra Classic

• FLTR Road Glide (installs behind factory grille cloth)

2006–2013 (radio-powered or amplified):

• FLHX Street Glide

• FLHTC Electra Glide Classic

• FLHTCU Ultra Classic

• FLTR Road Glide (factory grille cloth required)

• FLTRU Road Glide Ultra

Note: Not compatible with 1998–2005 models equipped with the Harley-Davidson branded amplifier mounted under the Tour Pak.

Marine-Rated Durability for the Road

The XM50F isn’t just about sound — it’s built for the ride. The weather-resistant construction handles exposure to moisture, UV rays, and dust without degrading over time. The speaker cones are injection-molded for strength, and the materials used are optimized for outdoor environments. Whether you're touring through summer heat or light rain, these speakers are ready for the ride.

Designed for Amplified Sound Systems

While they work with head units, the Kenwood XM50F shines brightest when paired with a 2-ohm stable amplifier. The high sensitivity (94 dB) ensures excellent volume and efficiency, making them a great match for aftermarket amp upgrades like Kenwood, Rockford Fosgate, or Soundstream Harley-specific amps. Their wide frequency response (40 Hz – 25 kHz) ensures full-range sound that feels immersive and powerful.

Key Features

• 5.25” Coaxial Motorcycle Speakers – Designed for Harley-Davidson Touring models.

• 2-Ohm Impedance – Pulls more power from factory and aftermarket amplifiers.

• 150 Watts RMS / 300 Watts Peak – Handles high volume without distortion.

• Injection-Molded Polypropylene Woofer – Delivers clear midbass response.

• 1” PEI Dome Tweeter – Produces detailed, non-fatiguing high frequencies.

• Weather-Resistant Design – Built to perform in tough outdoor conditions.

• Grilles Included – Not compatible with Road Glide factory grille placement.

Why Choose the Kenwood XM50F?

The Kenwood XM50F is purpose-built to give your Harley the volume and clarity it deserves. With high power handling, a durable build, and plug-and-play compatibility for 1998–2013 Harley Touring models, these speakers provide a major upgrade over factory sound — no fabrication or guesswork needed. Whether you’re riding across the country or just out for a weekend cruise, the XM50F delivers the soundtrack to match your journey.

What’s in the Box?

• 2 x Kenwood XM50F 5.25” Coaxial Motorcycle Speakers

• 2 x Grilles (note: not compatible with Road Glide installations)

• Mounting Hardware

• User Manual

• Kenwood Logo Decals

Specifications

• Speaker Size: 5.25 inches

• Power Handling (RMS): 150 watts

• Peak Power: 300 watts

• Impedance: 2 ohms

• Frequency Response: 40 Hz – 25,000 Hz

• Sensitivity: 94 dB

• Mounting Depth: 2.45 inches

• Tweeter Size: 1” PEI Dome

• Grille Compatibility: Not for Road Glide models — install behind stock cloth grille

• Warranty: 2 Years

FAQs

Do the Kenwood XM50F speakers fit my Harley?

• If you have a 1998–2013 Harley-Davidson Touring model, they’re a direct-fit replacement for your factory front fairing speakers.

Do I need an amplifier for these?

• While they’ll work off head-unit power, they’re best paired with a 2-ohm stable amplifier to unlock their full performance.

Do these speakers come with grilles?

• Yes, but the grilles are not compatible with Road Glide fairings — for those models, the speakers install behind the factory cloth grille.

Are these speakers waterproof?

• They’re weather-resistant, designed to handle road spray, moisture, and UV exposure, perfect for outdoor motorcycle use.

Can I install these myself?

• Yes, installation is straightforward and uses factory mounting hardware and wiring — a direct drop-in for compatible models.

How do these compare to stock speakers?

• The Kenwood XM50F offers dramatically improved clarity, volume, and durability, especially at highway speeds or in noisy environments.